Mid-rise reference guide for structural engineers

The technical bulletins, specifier’s guides and software behind a Weyerhaeuser mid-rise assembly — gathered in one place. Choose a callout on the drawing, or use the list below.

Swipe the drawing sideways to see the whole assembly.

Thick-section Parallam PSL beams3

Deep Parallam PSL beams carrying floor loads across the assembly, including bolt-free connection detailing.

Holes and notches in TJI joists2

Where trades can put holes through TJI joists for mechanical, electrical and plumbing runs.

Allowable nailing2

Fastener schedules for sheathing to joists and to rim board and other Trus Joist products.

TimberStrand LSL wall framing2

Shear wall and zone framing information for TimberStrand LSL studs and plates.

Vertical load transfer details2

Carrying stacked wall loads down through the floor system at rim board and bearing locations.

Managing floor vibration2

Rating and tuning floor performance across the span, and the technical background behind it.

Balconies, decks and exposed framing3

Framing that sees weather: exterior walkways, moisture exposure and preservative-treated products.


Design software

Size and specify Trus Joist products in ForteWEB.

Open ForteWEB

Technical support

Questions on any of these documents or an assembly you’re detailing.

techsupport@WY.com 

1-888-453-8358

Your representative

Product availability varies by region. Find the contact for yours.

Specification Center

Where to buy

Dealers and distributors carrying Trus Joist products.

Find a supplier